Category
75W 12VDC CV Dali LED Intelligent Dimmable Driver Dali and Push 2 in 1 Dimmable LED Driver
Overview Product Description 75W 12VDC CV DALI and Push 2 in 1 Dimmable LED driverLED Intelligent Driver (constant volta
Overview
Detailed ImagesCompany Profile
Basic Info.
Model NO. | THR-GD75 |
Output | Power Max.75W |
Working Temperature | Ta: -20°c ~ 50°c Tc: |
Dimming Interface | Dali, Push Dim |
Output Current | Max.6.25A |
Output Voltage | 12VDC |
Transport Package | 296X44X33mm |
Specification | 300g |
Trademark | THR |
Origin | Jiangsu, China |
Production Capacity | 10000piece/Month |
Product Description
Product Description75W 12VDC CV DALI and Push 2 in 1 Dimmable LED driverLED Intelligent Driver (constant voltage)Features:-Dimming interface: DALI, Push DIM-With soft-on and fade in function, visual more comfortable.-Dimming range from 0-100%, LED start at 0.1% possible.-High frequency exemption level.-DALI dimming curves are available in linear and logarithmic curve.-DALI bus standard IEC62386-101, 102, 207.-Innovative thermal management technology, intelligent power life protection.-Over-heat / Over voltage/Over load / Short circuit protection, recover automatically.-Fully-protected plastic housing with design of dismountable end cover.-Compliant with Safety Extra Low Voltage standard.-Suitable for indoor l/ll/lll type lamps .-Up to 50,000-hour life time.-5 years warranty (Rubycon capacitor).SpecificationOUTPUT | Output Voltage | 12Vdc |
Output Voltage Range | 12Vdc±0.5Vdc | |
Output Current | Max.6.25A | |
Output Power | Max.75W | |
0utput Power Range | 0~75W | |
Strobe Level | High frequency exemption level. | |
Dimming Range | 0~100%, dimming depth: Max. 0.1% | |
Overload Power Limitation | ≥102% | |
Ripple & Noise | ≤200mV | |
PWM Frequency | 3600Hz | |
INPUT | Dimming Interface | DALI, Push DIM |
Input Voltage | 220-240Vac | |
Frequency | 50/60Hz | |
Input Current | Max.0.4A/230Vac | |
Power Factor | PF>0.97/230Vac, at full load | |
THD | ≤14% at 230Vac, at full load | |
Efficiency | 91% | |
Inrush Current | Cold start 30A at 230Vac | |
Control surge capability | L-N:2KV | |
Leakage Current | Max.0.5mA | |
ENVIRONMENT | Working Temperature | ta: -20°C ~ 50°C tc: 80°C |
Working Humidity | 20 ~ 95%RH, non-condensing | |
Storage Temp., Humidity | -40°C ~ 80°C, 10~ 95%RH | |
Temp. Coefficient | +0.03%/°C [0-50°C] | |
Vibration | 10~500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes | |
PROTECTION | Over-heat Protection | Intelligently adjusting or turning off the output current if the PCB temp |
Over Voltage Protection | Shut down the output when non-load voltage≥13V, re-power on to recover after fault condition is removed | |
Over Load Protection | Shut down the output when current load≥102%, auto recovers. | |
Short Circuit Protection | Shut down automatically if short circuit | |
PACKAGE | Dimension | 293x43x30mm |
Packing | 29 6x44x33mm | |
Weight | 300g±10g |